Car Marty Pinout
Here’s the Pinout for the Accessory port on the Fujitsu Car Marty. This will allow you to get video out.
Port as seen from the back of the machine.
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 |
| 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 |
IMPORTANT: The metal shielding that makes up the ENTIRE port is grounded, so you have to make sure all your non-ground connections aren’t touching it.
| 1 | Navigation Control | 12 | ? |
| 2 | Audio: Right Channel | 13 | Audio: Left Channel |
| 3 | GND | 14 | Composite Video |
| 4 | Audio: MONO | 15 | GND |
| 5 | Q-Transmit | 16 | S-Video Chroma |
| 6 | Q-Recieve | 17 | S-Video Luma |
| 7 | ? | 18 | +7V |
| 8 | ? | 19 | GND |
| 9 | ? | 20 | ? |
| 10 | GND | 21 | ? |
| 11 | ? | 22 | GND |
Composite Video Cable Diagram
You don’t need to use two ground lines, the audio and video lines can all be run from pin 3 if you want to save on space at the connector end.
Pin 2 goes to Audio Right Pin
Pin 3 goes to Audio Right and Left Ground
Pin 10 goes to Composite Video Ground
Pin 13 goes to Audio Left Pin
Pin 14 goes to Composite Video Pin
It’s also possible to use S-Video using the S-Video pins listed above
| Files | |
| Accessory Port STL File | Zip |
This is still a WIP
Advertisements